Mineral / Pure Drinking Water Filling 3 In 1 Machine Production
Spring cramps are used in the bottle washing process.The empty
bottles can be turned over 180 along the conveying rail.There are
two times of internal and external washing, the efficiency of
bottle washing is high.
Rinsing machine adopts Sky original and double-opened bottle
clip.Bottle clip lock the bottleneck, the material of bottle clip
is SUS304,which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle.The extrusive
droplet with 15 angleensures to wash all side of the bottle, and
can save the water.Made of stainless steel of superior quality.Drinking water machine equipped with bottle jam protection device.
Automatic Monobloc Mineral Water Bottling Plant/Production Line
design of filling structure is reasonable and hygiene dead angle,
the run of equipment is stable, it can control the material from
the bottleneck, the control accuracy is within ±2mm (subject to bottle design).The filling valve material is
SUS304.The filling system has liquid level automatic
control.Filling valve elevator, after filling valve contact the
bottle neck, it starts to fill.Bottle is conveying by the wheel in
the filling part.
Screw capping ,machine is most precision part in the 3-1 machine
,it has a big influence to the goods stability and reliability of
the screw capping has following feature.
1) Sky import of advanced technology of screw capping, improve the
stability and reliability of the screw capping machine.The magnetic
torque is used foe screw capping.The power of screw capping can be
adjusted without steps.The power of the screw capping can also be
fixed, and the caps will not be damaged, the capping is reliable.
2) In the screw capping part, it installed photoelectrical control,
when it has no cap, or the cap is bad, the machine will stop
based on 500ml